Do you have questions? Let's talk! Get in Contact
info@betakim.com.tr

Aluminium stearate, rofob3, Aluminium tristearate, 637-12-7

Aluminium stearate, rofob3, Aluminium tristearate, 637-12-7

CAS: 637-12-7

Molecular Formula: C54H105AlO6

Names and Identifiers

Name Aluminium stearate
Synonyms rofob3
aluminum salt
Aluminum Stearate
Aluminium stearate
Aluminum tristearate
Aluminum octadecanoa
Aluminium tristearate
Aluminum octadecanoate
aluminium octadecanoate
Aluminium stearate tech
aluminium (tri) stearate
Tristearic acid aluminum
Stearic acid aluminium salt
octadecanoate, aluminum salt
octadecanoicacid,aluminumsalt
Tristearic acid aluminum salt
Trisstearic acid aluminum salt
Aluminium stearate white powder
Trioctadecanoic acid aluminum salt
CAS 637-12-7
EINECS 211-279-5
InChI InChI:1S/3C18H36O2.Al/c3*1-2-3-4-5-6-7-8-9-10-11-12-13-14-15-16-17-18(19)20;/h3*2-17H2,1H3,(H,19,20);/q;;;+3/p-3

Physico-chemical Properties

Molecular Formula C54H105AlO6
Molar Mass 877.39
Density 1.01
Melting Point 103°C
Boling Point 250℃[at 101 325 Pa]
Water Solubility Soluble in alkali, glycol, chlorinated hydrocarbons, petroleum, benzene, turpentine oil, mineral oil, vegetable oil, mixture of benzene, toluene and the three xylene isomers. Insoluble in water, ethan
Solubility Soluble in ethanol, benzene, turpentine, mineral oil, sodium hydroxide solution, turpentine, toluene, alcohol and other solvents, almost insoluble in water.
Vapor Presure 0Pa at 25℃
Appearance White amorphous powder.
Specific Gravity 1.01
Color white
Exposure Limit ACGIH: TWA 1 mg/m3
Merck 14,364
Storage Condition Room Temprature
Stability Stable. Incompatible with strong oxidizing agents.
Sensitive Easily absorbing moisture
MDL MFCD00036389
Physical and Chemical Properties White powder. Insoluble in water, ethanol, ether, soluble in alkali, turpentine, mineral oil, petroleum, kerosene and benzene and other solvents. Decomposition to stearic acid and corresponding salts in the presence of strong acids
Use Used as heat stabilizer and lubricant for polyvinyl chloride plastics, anti-settling agent and drier for paint industry, waterproof agent for fabrics, thickening agent for lubricating oil, etc

Risk and Safety

Hazard Symbols Xi - Irritant
Irritant
Risk Codes 36/37/38 - Irritating to eyes, respiratory system and skin.
Safety Description S22 - Do not breathe dust.
S24/25 - Avoid contact with skin and eyes.
S36 - Wear suitable protective clothing.
S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
WGK Germany 3
RTECS BD0707000
TSCA Yes

Upstream Downstream Industry

Raw Materials Aluminum sulfate
Aluminum potassium disulfate dodecahydrate
Sodium hydroxide
Stearic acid

Nature

white or yellowish powder. The melting point was 117-120 °c. Do not dissolve in water, ethanol, ether, soluble in lye, turpentine. With strong acids can be decomposed into stearic acid and the corresponding aluminum salts.

Preparation Method

with stearic acid as raw material, heating and melting, and sodium hydroxide solution for saponification reaction, and then with aluminum sulfate for double decomposition reaction, finally by washing, centrifugal dehydration, drying.

Introduction

In case of strong acid, it decomposes into stearic acid and corresponding salt.

Use

It is used as a lubricant remover in oil field operations. For the raw materials of metal rust inhibitor, waterproof agent of building materials, polishing agent of ink, thickening agent of cosmetics, etc. Aluminum Stearate is used as a smoothing agent and thickener in coatings, and also has the effect of improving the thixotropy of coating films.

Reference Information

LogP 22.69
Use This product is used for raw materials of metal rust inhibitor, waterproofing agent of building materials, polishing agent of ink, thickening agent of cosmetics, etc. Aluminum Stearate is used as a smoothing agent and thickener in coatings, and also has the effect of improving the thixotropy of coating films.
used as waterproof agent, plastic additives and lubricants
used as heat stabilizer and lubricant for polyvinyl chloride plastics, anti-settling agent and drier for paint industry, thickening agent for lubricating oil
category toxic substances
flammability hazard characteristics flammable; Combustion-induced irritating smoke
storage and transportation characteristics warehouse ventilation and low temperature drying
extinguishing agent dry powder, foam, sand, carbon dioxide
Occupational Standard TWA 10 mg/m3

Do you have questions? Let us help!

Effective Business Solutions? — Get in Contact
Scroll