Do you have questions? Let's talk! Get in Contact
info@betakim.com.tr

1-methoxypropan-2-ol, 107-98-2, Methyl Propasol, M, ethyl Proxitol

1-methoxypropan-2-ol, 107-98-2, Methyl PropasolM, ethyl Proxitol

1-Methoxy-2-propanol

CAS: 107-98-2

Molecular Formula: C4H10O2
 

1-methoxypropan-2-ol - Names and Identifiers

Name 1-Methoxy-2-propanol
Synonyms Pm
PM
Methyl Propasol
Methoxypropanol
Methyl Proxitol
methoxy propanol
Methoxy-2-propanol
1-Methoxypropan-2-Ol
1-Methoxy-2-propanol
(2S)-1-methoxypropan-2-ol
1-methoxypropane-1,2-diol
1-Methoxy-2-Hydroxypropane
Propanediol monomethyl ether
Propylene Glycol Monomethyl Ether
1,2-Propyleneglycol-1-Methyl Ether
A-Propylene Glycol Monomethyl Ether
1,2-Propylene Glycol 1-Monomethyl Ether
1,2-Propylene Glycol-1-Monomethyl Ether
CAS 107-98-2
EINECS 203-539-1
InChI InChI:1S/C4H10O2/c1-4(5)3-6-2/h4-5H,3H2,1-2H3

1-methoxypropan-2-ol - Physico-chemical Properties

Molecular Formula C4H10O2
Molar Mass 90.12
Melting Point -97℃
Boling Point 120°C
Water Solubility soluble
Appearance Colorless liquid
Storage Condition Store in a cool, dry and ventilated place, avoid direct sunlight, and store separately from oxidants
Sensitive Easily absorbing moisture
MDL MFCD00004537
Physical and Chemical Properties Appearance colorless transparent liquid
Use Mainly used as Nitro fiber, alkyd resin and maleic anhydride modified phenolic resin excellent solvent, used as jet fuel antifreeze and brake fluid additives; Mainly used as solvent, dispersant and diluent, also used as fuel antifreeze, extractant

1-methoxypropan-2-ol - Risk and Safety

Risk Codes R10 - Flammable
Safety Description S24/25 - Avoid contact with skin and eyes.
S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
UN IDs UN 3092

1-methoxypropan-2-ol - Nature

colorless transparent flammable volatile liquid. The relative density was 0.9234. Boiling Point 121 °c. Vapor pressure (20 degrees C) 1070Pa. Melting Point -95 °c (below this temperature becomes vitreous). Viscosity (20 deg C) 1.9mPa.s. Refractive index 4036. The molar heat of vaporization was 32.64 kJ/mol. Flash point (Open Cup) 36 °c. Miscible with water.

1-methoxypropan-2-ol - Preparation Method

1,2 A propylene oxide and methanol are reacted in the presence of a catalyst, and the reaction product is subjected to crude distillation and rectification to obtain a finished product.

1-methoxypropan-2-ol - Introduction

Miscible with water.

1-methoxypropan-2-ol - Use

as a solvent, dispersant or diluent used in coating, ink, printing and dyeing, pesticide, cellulose, acrylate and other industries. It can also be used as a fuel antifreeze, a cleaning agent, an extractant, a non-ferrous metal ore dressing agent, etc. It can also be used as a raw material for organic synthesis.

1-methoxypropan-2-ol - Safety

  • mouse oral LD50 6.6g/kg. Vapor on the eyes and nasal mucosa of animals have a stimulating effect, saturated concentration (18. 4~36.8 mg/L), a few hours of death. Liquid contact with the skin (rabbits) can cause anesthesia, long-term or large dose (> 10 ml/kg) contact, can be fatal (LD50 13~14g/kg). Protective gear should be worn during operation. In addition, the vapor generated should be removed in situ to protect the skin.
  • This product is a flammable liquid and should be handled as a flammable liquid. Storage tanks and reactors, etc., should be covered with dry nitrogen. Electrical equipment should be explosion-proof. Flammable materials shall be stored and transported according to regulations.

1-methoxypropan-2-ol - Introduction

Nature:
1. Propylene glycol monomethyl ether is a colorless transparent liquid with low volatility and toxicity.
2. It is miscible with water and various organic solvents, and has good solubility.

Usage:
1. Propylene glycol monomethyl ether is mainly used as a solvent in organic synthesis and can be used to synthesize aliphatic polyethers, resins, and other chemicals.
2. It is also used in the preparation of coatings, inks, cleaning agents, camphor and other products, and has applications in industry such as cleaning agents, degreasers, and refrigerants.

Method:
Propylene glycol monomethyl ether can be synthesized by reacting propylene glycol and methanol under acidic catalysts. The specific steps include adding propylene glycol and methanol to the reactor, adding an appropriate amount of acidic catalyst, heating and stirring the reaction for a certain period of time, and distilling to obtain propylene glycol monomethyl ether product.

Security information:
1. Propylene glycol monomethyl ether has no significant harm to the human body under normal conditions, but long-term exposure may cause irritation to the respiratory tract, skin, and eyes.
2. When using, be careful to avoid contact with skin and eyes, and avoid inhaling vapors.
3. During storage and operation, attention should be paid to preventing fires and static electricity, and to avoid mixing incompatible substances.
4. It is necessary to use in a well ventilated area and wear appropriate protective equipment.

Images

Do you have questions? Let us help!

Effective Business Solutions? — Get in Contact
Scroll